Can You Use 2 Modems in the Same House

Connecting Two Routers Within One Network: Boosting Wi-Fi, Shared Resources

Read this commodity to find out how to connect ii or more routers to one network, how to heave your Wi-Fi network indicate or create one more access bespeak within the existing network. We will consider 2 means of doing it – with a cable or Wi-Fi connection.

Contents

• Why Would Yous Combine Several Routers Into I Network?
• How to Connect Routers by Wi-Fi?
• How to Build a Network of Several Routers with a Cable Connection?
  • LAN/LAN Connexion
  • LAN/WAN Connection

Become to view

How to Connect Two Routers to One Network, Boost Wi Fi and Share Resources 🌐

Why Would You Combine Several Routers Into Ane Network?

In some situations, one router may exist bereft to build a network or provide high-quality Wi-Fi coverage. It means that it may exist unable to provide the desired Wi-Fi coverage area or may not take the number of ports required for the devices that are connected to such network. Some rooms or premises may appear to be beyond the range of your router's Wi-Fi point. This state of affairs is well-known to people who dealt with the chore of building a Wi-Fi network in a big business firm, apartment or an function consisting of many rooms. If information technology happens, additional equipment has to exist installed to extend the network to the desired coverage. And information technology'southward not that hard as it may seem.

There are several means of doing it which we are going to discuss in this commodity:

• The first variant is connecting two or more routers with a cable. You will have to lay the cable from one router to the other(south). Doing it is not ever user-friendly, only it is the most stable and reliable way to get them connected. If yous want a steadily operating network with high speed for a number of devices, the routers should utilise cablevision connection.
• The second variant is connecting the routers past Wi-Fi. In this case, the bridge connexion (WDS) is used, or the repeater manner. In fact, they are the same, but these settings are implemented differently in routers by different manufacturers.

So, here is the starting signal. We take the main router connected to the Internet, and information technology broadcasts a Wi-Fi network. We need to install one more router, for example, in another room or on another floor. This 2nd router will kind of boost the Wi-Fi network provided by the main router and help to extend the same network and so that it covers more than distant bounds.

The 2nd router can be continued to the main router by cable or Wi-Fi.

Let's accept a closer await at both connection methods.

How to Connect Routers by Wi-Fi?

Most often, routers are connected by Wi-Fi, and it seems natural equally information technology spares you the efforts for laying cables and drilling holes through the walls.

In my example, the primary router is TP-link TL-WR841N. It broadcasts a Wi-Fi network with the name hetmansoftware.

Please bear in mind that the router nosotros are going to connect to in the bridge manner should be configured already. That is, the Internet connection should be upwardly and running, with the Wi-Fi network being broadcast.

There is a special commodity on how to configure a router and a detailed video guide to help you find your manner through the procedure. You are welcome to view these materials for better agreement.

Before you lot motility on to configure the 2d router, it is necessary to change the settings of the chief router's wireless network and then that the aqueduct for this network will be static instead of automated.

For case, if your main router is another TP-Link, you lot can change the channel in the settings, by visiting the Wireless tab. In the field Channel specify a static channel. For example: 1, or ix, annihilation. Save the settings.

Now that the static channel has been fix, you can exit the main router's settings.

Let's configure the router that will operate in the WDS way. In my case, the specific model being used is TР-Link Archer C20. Become to the router settings.

For starters, you demand to change the IP address of the second router. You take to avoid the situation of having two devices with the same IP addresses within i network. For example, if the main router has the IP address 192.168.0.1, and the other router too has the address 192.168.0.1, the two addresses will exist in conflict. Go to the tab Network / LAN. In the field IP address change the last digit – say, put 2 instead of 1. Or, every bit in my case, change it from 192.168.i.1 to 192.168.0.ii. Save the modified settings.

Why should you do it this way? You need to know the IP address of the main router which you are going to connect to. If information technology has the accost 192.168.1.ane, and so the address for the router which you desire to connect by WDS should be changed to 192.168.1.2. If the master router has the address 192.168.0.one, you lot should assign the other router the post-obit address: 192.168.0.2. It is important to have both routers in one subnetwork.

Go to the settings once again, but this time the IP address will be unlike – 192.168.0.2. The one y'all have specified before.

Go to the tab Wireless / Basic Settings. In the field Wireless Network Name you tin specify the name of the 2d wireless network. In the field Aqueduct, brand certain you lot give the same channel that you accept specified in the settings of the main router. In my case, the aqueduct is 9.

Now check the box next to Enable WDS, and click on Browse.

From the list, select the network that your router volition become its Net connection from. Click on the Connect link next to the network you have chosen.

Now the but thing left to do is give the password to the main network in the Countersign field. Type it and click on the Salve button.

After rebooting, go to the second router'south settings again. While y'all are in the main folio (the Status tab) look at the Wireless section. Information technology should say Enabled in the line WDS Status. It means that the second router has already connected to the master router, and now it is supposed to broadcast Wi-Fi.

However, the Cyberspace connection will be bachelor by Wi-Fi only, and if you connect devices to the router (operating in the WDS mode) with a cablevision, they volition not exist able to go online.

To set up this function properly, you should disable DHCP server for the router which has the WDS bridge configured – that is, for the router which is the secondary 1 in my case. It is also necessary to accept its local IP address in the same subnetwork where the primary (chief) router belongs to.

That is why you should enter the DHCP carte du jour of the secondary router and disable this function.

This is the last pace in getting 2 routers continued past Wi-Fi.

Find the correct location to identify the second router there so that it falls within the constructive range of the main router. Set the desired proper noun for the wireless network and a password. Nosotros accept already described this pace in detail in our article about configuring Wi-Fi manner for a router.

How to Build a Network of Several Routers with a Cable Connectedness?

There are two ways to connect several routers into one network with a cable. They are as follows:

• The so-called LAN/LAN connection. That is, edifice a network consisting of several routers past connecting their LAN ports with a network cablevision.

  

• And LAN/WAN connection. That is, building a network consisting of several routers by connecting the LAN port of the principal router with the WAN/Cyberspace port of the secondary router with a network cablevision.

  

Let's consider each 1 in item.

LAN/LAN Connectedness

In example of a LAN/LAN connection, take two routers and decide which one you desire to use as the primary device. Commonly information technology is the router which receives the Cyberspace connection cablevision from your Internet service provider.

Use a network cable to connect LAN ports of the primary router with the additional (secondary) router.

Allow'southward suppose that we have already configured the Net connection for the commencement router, and so I will skip this stride. If the main router does non have whatsoever Internet connection withal, fix this problem – just read our commodity on basic settings of a Wi-Fi router.

Connect to the offset device

• and check if it has DHCP server enabled. By default, information technology is usually enabled. To do it, go to the menu DHCP / DHCP Settings.

  

• If DHCP Server is disabled, enable information technology.

• Don't forget to save changes.

Then connect to the other device,

• And disable DHCP Server, because it will receive all addresses from the main router. To do it, get to the menu DHCP / DHCP Settings.

  

• If DHCP Server is enabled, disable it.

• In the department Network/ LAN alter the IP accost so that it doesn't coincide with that of the main router. For example, alter information technology to 192.168.0.2. Considering the main router has 192.168.0.1

• Save.

  

Later rebooting the secondary router, it should exist working in 1 network with the commencement (primary / chief) i, Receive the Internet connection from it, and operate as an access point.

LAN/WAN Connexion

The second method of combining two routers into ane network is with a network cable.

In case of a LAN/WAN connection, utilize a network cablevision to connect the LAN port of the main router with the WAN/Internet port of the other (secondary) router.

Connect to the beginning device:

• and check if it has DHCP server enabled. By default, information technology is normally enabled. To do it, go to the menu DHCP / DHCP Settings.

  

• If DHCP Server is disabled, enable information technology.

• Don't forget to save changes.

Then connect to the other device,

• For the other device, go to the section Network / WAN and set the Connection Type equally Dynamic IP. Save the changes.

  

• In the DHCP section, leave DHCP Server enabled.

  

• If you lot are planning to use LAN ports of the secondary router, make sure that their IP addresses do not come into disharmonize with the corresponding addresses of the primary router.

  That is, if your primary router operates inside the range of 192.168.0.100 to 192.168.0.199, it is better to have the secondary router range from 192.168.0.200 to 192.168.0.299, but e'er within the main subnetwork.

• Save.

After that, a separate access indicate tin can be launched for each of the routers. If y'all did everything right, both routers will take an Internet connection, operate inside 1 network and be able to access network devices.

Those were all methods of connecting several routers to one network, wireless or wired.

If you have any questions while you are combining several routers into one network, yous are welcome to ask past posting a comment.

Go to view

How to Ready Up WiFi Network in Router TP-Link AC750 Archer C20 🌐💻📱

hyderthatirly66.blogspot.com

Source: https://hetmanrecovery.com/recovery_news/connection-of-2-routers-in-one-network-wifi-gain-shared-resources.htm

Share this post